Powering Off The Printer - SATO CL4NX Operator's Manual

Powering Off the Printer

• Do not touch the power button, connect or disconnect the power cord while your hands
are wet. Doing so could cause an electric shock.
• Do not power off the printer during operation, such as when printing or updating. Doing
so could cause a malfunction of the printer.
• Do not disconnect the power cord until the powering off process is completed on the
printer.
• An incorrect power on/off operation may damage the printer settings. In such a case,
the printer settings are reset to their default values. It is always recommended to use
the power button to allow proper shutdown of the printer and ensure changes made to
menu settings are saved appropriately.
• You can power on/off the printer from the main power source by enabling [Start on AC]
under the [System] menu.
1. Make sure that the printer is in Offline mode before you power off.
If "Online" appears on the screen, press the button to change to Offline mode.
70
Powering Off the Printer