[Printing] Menu - SATO CL4NX Operator's Manual

[Printing] Menu

The following settings are available in the [Printing] menu:
Label Length
Set the length of the media.
Label Width
Set the width of the media.
Auto Measure
Automatically measure the length of the media.
Ribbon
Set whether to print using a ribbon or direct thermal media.
Ribbon Near End
Enable or disable the warning when the ribbon is about to run out.
◦ Appears only if you have selected [Use Ribbon] in the [Ribbon] menu.
Speed
Set the print speed.
Sensor Type
Set the media sensor type.
Auto-mode
Automatically set the print mode.
Print Mode
Manually set the print mode.
Backfeed
Set the backfeed operation.
219