SATO CL4NX Operator's Manual page 486

The setting items are as follows:
Copy
Copy the barcode check log data to the USB memory.
◦ Available only if you have installed the USB memory.
Remove
Remove the barcode check log data.
Format and Contents of the Barcode Check Log Data
The barcode check log data is created in the following format:
Format ID
YYYY
MM
DD
hh
mm
ss
ZZZ
TTTTTTT
IR
SRSR
drdr...
RRRRRRR
Description
Year of the date when the barcode check was performed
Month of the date when the barcode check was performed
Day of the date when the barcode check was performed
Hour of the time when the barcode check was performed
Minute of the time when the barcode check was performed
Second of the time when the barcode check was performed
1
Time zone
The total number of printed labels after the printer is powered on.
*When the total number of printed labels becomes greater than an 8-digit
number, the output digit will increase.
The number of read data received after reaching the position at which the
check starts.
*When the check result is "IGNORED", this shows "00".
Size of read data (bytes)
Read data
Check result
SUCCESS •
•
In readable mode, this means everything is correct.
In comparison mode, this means that the read data and
print data match.
486
[Barcode Checker]
1
1
1
1
1
1