SATO CL4NX Operator's Manual page 369

[Antenna Pitch]
Set the antenna pitch according to the Inlay Configuration Guide. For details, access the following
URL:
http://www.satoworldwide.com/rfid/
Appears only if the module is UHF.
The options are as follows:
• [Standard]
• [Short]
[Write Power]
Set radio power level used to write information to RFID tag according to the Inlay Configuration Guide.
For details, access the following URL:
http://www.satoworldwide.com/rfid/
Appears only if the module is UHF.
The setting range is from 0 to 24 dBm.
369