SATO CL4NX Operator's Manual page 684

Hide thumbs Also See for CL4NX:

Table of Contents

Never use organic solvents, such as thinner and benzine to clean the printer.

For details on the cleaning kit, refer to the manual attached to the cleaning kit.

1. Make sure that the printer is powered off, and disconnect the power cord from the

2. Open the top cover.

Open the top cover fully to prevent accidental drop of the cover.

3. Push the head lock lever (1) towards the rear to unlock the print head.

The print head and its surroundings are hot after printing. Be careful not to touch it, to

avoid being burned.

Touching the edge of the print head with your bare hand could cause injury.

4. Remove the media and ribbon if they are already loaded.

Cleaning Using the Cleaning Kit