SATO CL4NX Operator's Manual page 363

Inputs
Set the input pin No. of the Signal Print Start/Signal Reprint.
Outputs
Set the output pin No. of the signals.
[EXT 9PIN]
Set the function of the EXT 9PIN output.
The options are as follows:
MODE1
The output signal becomes "Active" only when there is data in print buffer and printer is ONLINE.
MODE2
The output signal becomes "Active" when printer is ONLINE regardless of print data in buffer.
[EXT Mode]
Set the mode of the Print End Signal.
The options are as follows:
363