Eject Cut
Set the time from the print completion until the print cut.
◦
Appears only if you have selected [Cut & Print] in the [Print Mode] menu.
Darkness Range
Set the range of the print darkness.
Darkness
Set the print darkness.
Imaging
Set the print reference position in the vertical and horizontal directions.
Advanced
Set the sensor operation and print motion.
[Label Length]
Set the length of the media.
The setting range varies depending on the print resolution of the printer.
The setting range of the label length is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm
(0.0049"))
305 dpi
(1 dot = 0.083 mm
(0.0033"))
609 dpi
CL4NX
1 to 20000 dots
1 to 18000 dots
1 to 9600 dots
CL6NX
1 to 20000 dots
1 to 18000 dots
-
220
[Label Length]