SATO CL4NX Operator's Manual page 418

Pause Mode
Select the setting to be prioritized for pause mode.
1 Byte Codepage
Select the setting to be prioritized for the 1 byte code page.
SDPL Measure Unit
Select the setting to be prioritized for the measurement unit.
Scalable Font Style
Select the setting to be prioritized for the scalable font style.
Darkness
Factory Offset
Speed
Sensor Type
The option selected in the [Printing] > [Advanced] > [Prioritize] menu is applied to these four
settings and shown on this screen.
[Format Attribute]
Set whether to prioritize the settings through the printer or through commands for the format attribute
setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the printer.
418
[SDPL]