[Barcode Checker]
[Reading Test]
Perform a test read with the connected barcode checker.
Available only if you have connected the barcode checker.
Set a label with barcodes within the scanning range of the barcode checker, and then press the
button to start reading.
If reading is successful, the code type and read data are displayed. The data is displayed only up to 23
bytes from the beginning.
If the reading is unsuccessful, or if the displayed read result is not correct, adjust the position of the
barcode checker by operating the barcode checker stand. For details on how to use the barcode
checker stand, refer to the Barcode Checker Stand Kit Installation Manual that came with the barcode
checker stand kit.
480