Rs-232C Interface Connection (Standard) - SATO CL4NX Operator's Manual

Hide thumbs Also See for CL4NX:

Table of Contents

This feature is supported on printers from serial number 6B~ and above.

If it does not communicate well, shift the Android device to the front, back, left and

right, and then hold it up again.

For the operation of the NFC for the Android device, refer to the user manual for the

Android device.

RS-232C Interface Connection (Standard)

Connect the interface cable when the printer is powered off.

Connect the RS-232C cable to the RS-232C connector (1) of the printer.

Configure the interface settings of the printer according to the interface settings of the computer.

The communication conditions of the RS-232C interface can be set through the printer's [Interface]

menu or the All-In-One Tool.