SATO CL4NX Operator's Manual page 448

The options are as follows:
Enabled
Enable the password setting.
Disabled
Disable the password setting.
• The default password is 0310. You can change the password in [Password] > [Change
Password] > [level1].
[Install Security]
Enable or disable the password input for installing the pkg file to the printer.
If you have enabled the password input, the printer requires you to enter the password set in the
[Password] screen before you can download the package file.
The options are as follows:
Disabled
No password is required to install a pkg file.
USB
Password is required to install a pkg file from the USB memory.
Always
Password is required to install a pkg file from the USB memory or downloaded from computer.
• The password used for installing a pkg file can be any passwords set in the [System] >
[Password].
Contact your SATO reseller or technical support center for more information of the pkg
file.
448
[Password]