SATO CL4NX Operator's Manual page 374

Hide thumbs Also See for CL4NX:

Table of Contents

[Non-RFID Warning]

Set whether to warn the use of an RFID tag by mistake if RFID command is not used.

The options are as follows:

Shows the non-RFID warning upon error.

Ignore the non-RFID error.

With Non-RFID warning enabled and RFID tag loaded, if the items received do not contain an RFID

issue command, a warning error appears before printing so that the RFID tag will not be wasted.

button (CANCEL) to clear the warning message.

[RFID] (CL4NX only)