External Signal (Ext) Interface - SATO CL4NX Operator's Manual

Connector Pin Specifications
Pin I/O
No.
16 -
17 -
18 -
19 -
20-27 -
28 -
29 -
30 -
31 Input
32 Output
33-35 -
36 Input
Cable Specifications
Cable Connector
Cable Length
• Specifications are subject to change without notice.

External Signal (EXT) Interface

Basic Specifications of External Signal (EXT) Interface
This interface is designed to connect the printer with other peripherals.
Basic Specifications
Connector
Signal Levels
Description
LOGIC Ground
Frame Ground
+5 V
STROBE RETURN
DATA 1 - DATA 8 RETURN
ACK RETURN
BUSY RETURN
PAPER EMPTY RETURN
INITIALIZE
FAULT
Not in use
SELECT INPUT
Amphenol 36 pins, male
1.5 m (5 feet) or less
Centronics IDC Type 14 pins (Female)
High-level
+4.2 to +5.0 V
758
External Signal (EXT) Interface