Optional Devices - SATO CL4NX Operator's Manual

Optional Devices

The optional devices for the printer are as follows. The optional devices can be factory installed or
installed by the customer engineer. Contact your SATO reseller or technical support center.
Optional Devices
Cutter unit
Simple dispenser kit
Dispenser unit (with internal liner
rewinder)
Linerless cutter kit
RTC (Calendar) kit
External rewinder
UHF RFID kit
(ISO/IEC 18000-6 Type C Gen2)
HF RFID kit
(ISO/IEC15693, ISO/IEC 14443
TypeA, FeliCa Lite-S)
WLAN 802.11a/b/g/n Dual Band
WLAN (2.4GHz, 5GHz)
Barcode checker stand kit
External cover kit
Description
Automatically cuts the media in
the designated number of pages.
Removes the label from the liner.
The liner is ejected out of the
printer.
Removes the label from the liner.
The liner can be ejected out of
the printer or rewound inside of
the printer.
The environmentally friendly
linerless labels can be used.
A calendar system for printing
the date and time on a label to
output.
Automatically rewinds the label
output by the printer.
Supports UHF RFID. It can read
and write to the IC tag and label.
Supports HF RFID. It can read
and write to the IC tag and label.
Communicates with the wireless
LAN.
A stand kit to mount the barcode
checker.
A set of covers to prevent dust
from entering the external
openings for label supply.
26
Optional Devices
Supported Models
CL4NX CL6NX
Available Available
Available Available
Available Available
Available -
Available Available
Available Available
RWG500 RWG500
(6-inch
extension
kit)
Available -
Available -
Available Available
Available Available
Available Available