SATO CL4NX Operator's Manual page 775

Item
Media Length (With
Liner)
Media Width
Media Width (With
Liner)
Diameter of Liner
Winding
*Above pitch and width are valid for die-cut labels. For media without liner like tags, refer to the
value 'with liner'.
• Linerless
Item
Media Length
Media Width
• The usable media sizes, the output speed and print quality vary depending on the
media specification, media and ribbon combination, printer settings and outputting
environment. It is recommended to perform a test print with the media and ribbon to be
used in advance.
Roll Diameter (Media Roll)
• Maximum φ220 mm (φ8.66")
• When using a dispenser unit with liner rewinder
Maximum φ220 mm (φ8.66")
Core Diameter (Media Roll)
• φ76 mm (φ3"), φ101 mm (φ4")
• When using a dispenser unit with liner rewinder
φ76 mm (φ3")
• Recommend to use 4" core for thick paper (more than 150 μm (0.0059")), non-
adhesive media and RFID tags/labels (CL4NX only).
Height (Fan-fold Media)
• Maximum 200 mm (7.87")
• When the printer and media are configured to the same height.
CL4NX
• 30 to 400 mm (1.18" to 15.75")
• 22 to 128 mm (0.87" to 5.04")
• 25 to 131 mm (0.98" to 5.16")
Maximum φ120 mm (4.72")
CL4NX
30 to 120 mm (1.18" to 4.72")
60 to 118 mm (2.36" to 4.65")
CL6NX
• 47 to 177 mm (1.85" to 6.96")
• 50 to 180 mm (1.97" to 7.01")
CL6NX
-
-
775