[Auto Measure] - SATO CL4NX Operator's Manual

[Auto Measure]

The printer automatically measures the length of the media.
The measured length of the media will be automatically saved in [Label Length].
The Auto Measure function can be performed when [Sensor Type] is set to [Gap] or [I-Mark].
The setting procedure of the label length using the Auto Measure function is as follows:
1. Load the media.
2. Set [Auto Measure] to [Enabled].
3. Press the
4. Open the print head. (Head Open error occurs.)
5. Close the print head. (The display returns to Offline screen.)
6. When you press the
length.
7. The measured label length is saved in [Label Length].
• When you have set [Auto Measure] to [Enabled], this function executes when the
printer powers on.
button or button to show the Online or Offline screen.
button, the printer feeds two pieces of label and measures the label
222
[Auto Measure]