Logging In To/Logging Out Of The Settings Mode; Item Selection - SATO CL4NX Operator's Manual

•
To exit the Settings mode, press the

Logging In to/Logging Out of the Settings Mode

The Settings mode logs in and logs out by the following procedure, if the password is enabled.
• If the password is enabled, input the password after entering the Settings mode.
When logged in to the Settings mode, [LOG OUT] appears on the bottom left of the screen.
•
Press the
Password is required to enter the Settings mode again.
• With password enabled, if no button is pressed for about 10 minutes after login, the
login session will end automatically. Password is required to enter the Settings mode
again.

Item Selection

Select an item in Settings mode according to the following procedure:
button to log out of the Settings mode.
button.
53