Adjusting The Print Speed - SATO CL4NX Operator's Manual

Adjusting the Print Speed

The adjustment of the print speed not only changes the speed of printing but also affects the print
quality.
The setting range of the print speed varies depending on the following print resolution:
Resolution
203 dpi
(8 dots/mm)
305 dpi
(12 dots/mm)
609 dpi
(24 dots/mm)
• When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands], the
data will be printed with the print speed specified by command.
• While the print job is paused, the [Adjustments] menu will appear instead of the
[Settings] menu and you can adjust the print speed.
• If the optional linerless cutter kit is installed to CL4NX, the setting range is 2 to 6
(inches/sec) (50.8 to 152 mm/sec) regardless of the printing resolution.
1. When the printer is in Online mode, press the
Offline mode.
2. Press the
CL4NX
2 to 10 (inches/sec) (50.8 to 254 mm/
sec)
2 to 8 (inches/sec) (50.8 to 203.2 mm/
sec)
2 to 6 (inches/sec) (50.8 to 152 mm/
sec)
button to show the [Settings] menu.
CL6NX
2 to 10 (inches/sec) (50.8 to 254 mm/
sec)
2 to 8 (inches/sec) (50.8 to 203.2 mm/
sec)
-
button to change the printer to
599