[Interface] Menu - SATO CL4NX Operator's Manual

[Interface] Menu

The initial value refers to the setting value of the printer when it was shipped from the factory. If you
reset the printer, the setting values of the printer will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing so will remove all the
customer settings.
Setting Item
[Network]
[Settings]
[LAN]
[IPv4]
[Mode]
[DHCP]
[IP Address]
[Netmask]
[Gateway]
[DNS]
[IPv6]
[Mode]
[DHCP]
[IP Address]
[Prefix Length]
[Gateway]
Initial Value
CL4NX CL6NX
DHCP
-
0.0.0.0
255.255.255.0
0.0.0.0
0.0.0.0
Disable
-
::
64
::
661
User Factory
Reset Reset
Yes/ Yes/
Interface Interface
- -
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface
- -
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface
Yes/ Yes/
Interface Interface