Media Sensor Type - SATO CL4NX Operator's Manual

Media Sensor Type

The printer adjusts the print position precisely by detecting I-marks or Gaps on the media (label) using
media sensors.
The I-marks or Gaps on each type of media are as follows:
I-mark label
(1) Media feed direction
Set the sensor type to detect the print position according to the media to be used.
Set the sensor type according to the following procedure:
1. Press the
The printer enters Offline mode.
Gap label
button in Online mode.
I-mark journal paper/
linerless label (CL4NX only)
94
Media Sensor Type