[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
This setting is applied to the following bitmap fonts:
U, S, M, WB, WL, XU, XS, XM, XL, X20, X21, X22, X23, X24
The options are as follows:
Enabled
Print zero with a slash.
Disabled
Print zero without a slash.
[Kanji]
Set the kanji code to be used.
The setting items are as follows:
Kanji Set
Set the kanji code to be used.
Character Code
Set the character code to be used.
386
[SBPL]