Installing The Printer Driver (Lan/Wireless Lan) - SATO CL4NX Operator's Manual

16. In [Devices and Printers], confirm that the printer is added to [Printers].
• The settings of the printer driver should be performed by the Administrator Privilege.

Installing the Printer Driver (LAN/Wireless LAN)

Do the following procedures to install the printer driver using a LAN/Wireless LAN. The following
procedures use Windows 8.1 as an example.
• Before starting the installation, close all applications.
• Power off the printer and connect the interface cable to a computer.
• When you do the printer driver setup, the properties settings, or the print settings, log in
with Administrator Privilege.
• When you use the printer driver, enable bi-directional communication.
• If the terminal service is being started with Windows Server 2008, change the terminal
service to the install mode. However, it is not guaranteed that the printer driver can be
used in the terminal service environment.
• When using multiple printers, it is necessary to install as many printer drivers as
printers, to identify each printer.
1. Power on the printer, and confirm that the printer is connected to the network.
129