SATO CL4NX Operator's Manual page 718

Error Message 1017 (SBPL Command Error)
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the
Cause and Countermeasure
Cause
Incorrect command or parameter in the print data.
For details of the error, check the "Caaa: <bb>: cc" part at the bottom of the screen.
◦ Caaa: position of error occurrence
◦ <bb>: error command name
◦ cc: error content
How to See the Command Error Information
Countermeasure
Check the print data.
If the error is not solved, power on the printer again.
• The command error appears when [Show Error] in [SBPL] under the [Applications]
menu is set to [Enabled].
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble
button (CANCEL) or
Show Error
button.
718