[Read Power]
Set radio power level used to read information from RFID tag according to the Inlay Configuration
Guide. For details, access the following URL:
http://www.satoworldwide.com/rfid/
Appears only if the module is UHF.
The setting range is from 0 to 24 dBm.
[Tag Offset]
Set distance to print on label BEFORE pausing to encode RFID according to the Inlay Configuration
Guide. This setting will be used when labels are not compatible with the CL4NX's antenna positions.
For details, access the following URL:
http://www.satoworldwide.com/rfid/
The setting range is from 0 to 240 mm.
370
[RFID] (CL4NX only)