SATO CL4NX Operator's Manual page 457

Pitch
Set the print position in the vertical direction.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm
(0.0049"))
305 dpi
(1 dot = 0.083 mm
(0.0033"))
609 dpi
(1 dot = 0.042 mm
(0.0017"))
When you decrease the setting value, the print position moves in the feed direction (toward the
front part of the media).
When you increase the setting value, the print position moves opposite the feed direction (toward
the end part of the media).
Offset
Set the stop position of the media.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm
(0.0049"))
305 dpi
(1 dot = 0.083 mm
(0.0033"))
609 dpi
(1 dot = 0.042 mm
(0.0017"))
When you decrease the setting value, the stop position moves in the feed direction (toward the
front part of the media).
When you increase the setting value, the stop position moves opposite the feed direction (toward
the end part of the media).
CL4NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-90 to 0 to 90 dots
CL4NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-90 to 0 to 90 dots
CL6NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-
CL6NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-
457