SATO CL4NX Operator's Manual page 371

[View]
Shows the RFID tag data.
Press the
Press the
data.
On the [Data Reading] screen, you can press the
read the tag currently set in the printer.
[Memory Bank]
Set the memory area of the RFID tag to read.
The readable memory areas are as follows:
If the installed module is UHF
EPC
EPC area
TID
TID area
button to change to the [Memory Bank] screen.
button (READ) to change to the [Data Reading] screen, to read and show the
button to feed the media and attempt to
371