SATO CL4NX Operator's Manual page 461

Label Width
Shows the necessary media width of the test print.
The necessary media width is 101.6 mm (4") for [Large] and 50.8 mm (2") for [Small].
Label Length
Set the length of one piece of the media used for the test print.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm
(0.0049"))
305 dpi
(1 dot = 0.083 mm
(0.0033"))
609 dpi
(1 dot = 0.042 mm
(0.0017"))
Pitch
Set the print position in the vertical direction.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm
(0.0049"))
305 dpi
(1 dot = 0.083 mm
(0.0033"))
609 dpi
(1 dot = 0.042 mm
(0.0017"))
When you decrease the setting value, the print position moves in the feed direction (toward the
front part of the media).
When you increase the setting value, the print position moves opposite the feed direction (toward
the end part of the media).
CL4NX
400 to 1600 dots
600 to 2400 dots
1200 to 4800 dots
CL4NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-90 to 0 to 90 dots
CL6NX
400 to 1600 dots
600 to 2400 dots
-
CL6NX
-30 to 0 to 30 dots
-45 to 0 to 45 dots
-
461