Usb Interface Connection (Standard); Lan Interface Connection (Standard) - SATO CL4NX Operator's Manual

• Do not connect or disconnect the interface cables (or use a switch box) with power
supplied to either the printer or computer. This may cause damage to the interface
circuitry in the printer or computer and is not covered by warranty.

USB Interface Connection (Standard)

Connect the interface cable when the printer is powered off.
Connect the USB cable to the USB connector (Type B) (1) of the printer.
The USB interface is selected after connecting the USB cable to the computer and the printer, and
powering on the printer while the computer is turned on.
• If the printer is powered on without installing the printer driver, Windows' Plug & Play
runs. When using the printer driver, do not power on the printer while the USB cable is
connected until instructed in the procedure for installing the printer driver.
• The recommended USB cable is the one within 2 meters (6.6 feet) length.

LAN Interface Connection (Standard)

Connect the interface cable when the printer is powered off.
Connect the LAN cable to the LAN connector (1) of the printer.
105