Registering A Cisco Webex Node Spa In The Cisco Webex Node Management System - Cisco ASR 1000 Configuration Manual

Chapter 22 Configuring the Cisco WebEx Node for ASR 1000 Series
In the Password field, click the Change Password link to open the Change your password dialog box.
Step 5
Enter your old password, new password, and confirmation of your new password in the specified fields
and click OK.

Registering a Cisco WebEx Node SPA in the Cisco WebEx Node Management System

This section describes the information required to perform initial activation of your Cisco WebEx Node
SPA in the Cisco WebEx Node Management System.
This task must be performed by a registered Cisco WebEx Node Management user. This could be
Note
someone in the role of a Cisco WebEx administrator for your enterprise, or multiple individuals
responsible for Cisco WebEx Node management for your enterprise.
To register and provision your Cisco WebEx Node for ASR 1000 Series, contact your Cisco WebEx
Step 1
administrator with the following information to register your Cisco WebEx node SPA with the WebEx
Data Center:
•
•
•
•
•
•
Once the Cisco WebEx Node SPA has been registered in the Cisco WebEx Node Management System,
Step 2
you need to obtain the following information from the Node Information page for the SPA in the Cisco
WebEx Node Management System:
•
•
•
Note
OL-14127-08
Company name
Phone number (this number is used to uniquely identify a customer location, not as a number for
actual contact)
Site name (for example, cisco.webex.com)
SPA serial number
Assigned hostname
Conferencing mode (either Web Conferencing or Voice and Video Conferencing)
wma-passcode—Must match the value in the service-engine wma-passcode configuration
command on the Cisco WebEx Node SPA.
wma-token—Must match the value in the service-engine wma-token configuration command on
the Cisco WebEx Node SPA.
wma-url—The URL string from the Cisco WebEx Node Management System must be configured
on the Cisco WebEx Node SPA using the service-engine wma-url command.
This security information must be configured on the Cisco WebEx Node for ASR 1000 Series
SPA using the CLI. For more information about configuring the CLI, see the
Virtual Service Engine Interface" section on page
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
22-5.
Prerequisites
"Configuring the
22-3