Parameter Lists - Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual

4 How to Programme

4.4 Parameter Lists

Changes during operation
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE" means that the it must be stopped before
a change can be made.
4-Set-up
'All set-up': the parameters can be set individually in each of the four set-ups, i.e. one single parameter can have four different data values.
'1 set-up': data value will be the same in all set-ups.
4
Conversion index
This number refers to a conversion figure used when writing or reading to and from the frequency converter.
Conv. index 100
Conv. factor 1
Data type
2
3
4
5
6
7
9
33
35
54
See the frequency converter
70
67 6 5 4
1/60 1000000 100000 10000
Description
Integer 8
Integer 16
Integer 32
Unsigned 8
Unsigned 16
Unsigned 32
Visible String
Normalized value 2 bytes
Bit sequence of 16 boolean variables
Time difference w/o date
Design Guide
for further information about data types 33, 35 and 54.
MG.33.AG.02 - VLT
3 2 1 0 -1
1000 100 10 1 0.1
®
is a registered Danfoss trademark
®
VLT AutomationDrive FC 300 Operating
-2 -3 -4 -5
0.01 0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
Instructions
-6