Using A Memory Card; Saving Controller Data To A Memory Card - Yamaha SRCP User Manual

10-6 Using a Memory Card

10
14
10-
10-6 Using a Memory Card
A memory card can be used with the TPB to back up the data in the SRCP controller.
Refer to "16-1-1 Memory card" for the procedure for handling a memory card and for the number of
data that can be stored.

10-6-1 Saving controller data to a memory card

1) Insert the memory card into the TPB.
2) On the initial screen, press
3) Next, press (B.UP).
F2
4) Press F1 (SAVE).
Press F1 (CARD) before pressing
(SAVE) if the SRCP controller version is 24.10
or later and the TPB version is 12.51 or later.
5) Specify the save area on the memory card.
Enter the save area with the number keys and
press .
6) The saved status of data on the memory card
can be checked by pressing
To check the saved status in AREA 3 onward,
press STEP or STEP to scroll the screen. To re-
UP DOWN
turn to the screen in step 5, press
(SYS).
F3
F1
(ID) in step 5.
F1
.
ESC
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
4next
1PRM 2B.UP3INIT
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
[B.UP-SAVE]
select card AREA
AREA _ [0-47]
1ID
[B.UP-ID]
AREA 0 : 03.09.01
AREA 1 : 03.09.10
AREA 2 :