Keypad Utility - Quantum Data 881 User Manual

Keypad Utility

882 Video Test Instrument User Guide (Rev A.35)
This section describes the Keypad utility and how to use it.
The keypad provides you with a quick and convenient way of changing between formats
and images. The interface from the Keypad to the 882 is through the serial interface. Once
connected you can change between formats and image with a single key stroke. You can
also control test sequences using the Keypad.
Use the following procedures to install and operate the remote keypad.
To install and enable the keypad:
1. Shut off the 882.
2. Connect the keypad to the serial port on the 882.
The serial port is on the back of the 882 on the lower panel. It is labeled Serial.
3. Press the Tools key. The Tools menu appears on the 882's display as shown below.
System
Sequence
Probe
AFC
4. Choose System pressing the adjacent item selection key. The following display
appears on the 882's display.
Clock
CalFactor
Network
Serial
5. Choose Serial to access the menu for enabling the Keypad. The following display
appears on the 882's display.
Serial Port
9600 baud
8 N 1
6. Press the Options key. The following information appears on the 882's display:
-Keypad
7. Press the softkey adjacent to the Keypad item to enable the keypad function.
A + appears next to the Keypad item indicating that the functionality is enabled.
Reports
ImgShift
Analyzer
CEC
Clone*
Server
About
GPib
69