Quantum Data 881 User Manual page 910

SMOD
Class
Description
Command syntax
Query syntax
Query response
Other required
commands
Example
532 Appendix A Command Reference
Sequence operating MODe
Sequence editor control
Sets the sequence mode. The SMOD? query returns the current setting of SMOD.
SMOD mode
mode
0 = disable
1 = enable manual step mode that stops at last step
2 = enable manual step mode that wraps to first step after last step
3 = enable continuous auto stepping
SMOD?
mode
The SEQL command loads the sequence and
SEQL MY_SEQ // Load "MY_SEQ" in edit buffer
SEQU // Start running the sequence in the buffer
SMOD 3 // Set the sequence mode
SEQU starts to run it.