Quantum Data 881 User Manual page 327

882 Video Test Instrument User Guide (Rev A.35)
IMGU
The AFDtest image appears on the connected HDMI display.
4. Enable and view image versions for the AFDtest image as follows:
a. Press the Options key. The following menu appears on the 882's display:
-More
-NoGamma
-Noise
b. Choose the More item by pressing the adjacent soft key until a + and Rendition
appears next to the item.
+More Rendition: 000
-NoGamma
-Noise
c. Press the + key to advance through the image versions.
Note: Select the image version that corresponds to the AFD case (or code) you want
to test. See the table on page 314 for a list of the image numbers that correspond with
each AFD case.
Alternatively, to enable and view the image versions using the command line interface,
enter the following commands:
ISUB 1 // Enables sub images
IVER 1 // Specifies the first image version
IMGU // Activates the image version
// Activates the AFDtest image
Red+
Green+
Blue+
Red+
Green+
Blue+
315