Quantum Data 881 User Manual page 294

282 Chapter 9 Testing HDMI Sink Devices
3. Press the Options key and select xvYCC colorimetry.
There are two color standards, xvYCC601 and xvYCC709. The appropriate one is
selected depending on the format.
RGB
YCbCr
*xvYCC
*4:4:4
Alternatively, you can load the xvYCC color space with the following command:
DVST 16
FMTU
4. Press the Content key and select the desired Munsell images as shown in the following
menu.
MESony_R
*MnslGM
MoireX
MoireY
Alternatively, you can load the format with the following command:
IMGL MnslClr
IMGU
5. Enable and view image versions as follows:
a. Press the Options key. The following menu appears on the 882's display:
-More
-NoGamma
-Noise
b. Choose the More item by pressing the adjacent soft key until a + appears next to
More and Rendition appears on the other side of the menu.
+More Rendition: 000
-NoGamma
-Noise
c. Press the + and - keys to advance through the image versions. Each version shows
the format parameters for a different format in the Source list.
Alternatively, to enable and view image versions using the command line interface,
enter the following commands:
ISUB 1 // Enables sub images
IVER 1 // Specifies the first image version
IMGU // Activates the image version
IVER 2 // Specifies the second image version
8-bits
10-bits
12-bits
4:2:2
MnslCLR
MnslPG
MoireX33
MoireY33
Red+
Green+
Blue+
Red+
Green+
Blue+