Quantum Data 881 User Manual page 79

882 Video Test Instrument User Guide (Rev A.35)
ISHL Newshift
ISHG 1
ISHU
5. Apply the imageshift file to the hardware using the ISHU command. For example:
ISHU //applies the imageshift file to the hardware
To stop the ImageShift utility through the command line interface:
1. To stop the Imageshift enter the following command.
ISHG 0
//Loads the values from the imageshift file named
//Newshift
//Initiates (gates on) the imageshift function
//Applies the values to the hardware
//Stops (gates off) the imageshift function
67