Table of Contents
Advertisement
882 Video Test Instrument User Guide (Rev A.35)
•
Self-calibrating–Analog video outputs are automatically adjusted against an internal
precision reference. This assures video levels that are precise and reliable. Signal
levels are auto-adjusted individually.
•
Probe–Trigger a scope or inspection camera using the probe signal. Position a pulse
anywhere in the frame.
•
PC Card–Clone one 882 to another using a standard CompactFlash card.
•
Auxiliary Channel Analyzer (ACA) –The ACA enables you to monitor DDC, HDCP, CEC
and EDID transactions for HDMI and HDCP, Link Layer and EDID transactions over the
DisplayPort auxiliary channels.
•
IEEE-488-GPIB (IEEE-488) interface. interface.
•
RS-232-Industry standard serial interface.
882E Optional Features
The following are the optional features available with the 882E. For the 882E one of the
two following options must be selected:
•
HDMI 1.3 Transmitter:
•
Advanced E-EDID parsing
•
Deep Color at 24/30/36-bit/pixel 4:4:4 RGB / YCbCr
•
16/20/24-bit/pixel 4:2:2 YCbCr
•
High-level Active Format Description (AFD) controls
•
AFD test suite
•
Pixel repetition test suite
•
Automatic and manual InfoFrame setup
•
Compressed Dolby Digital formats (Plus & TrueHD)
•
Internal sine wave 882 (LPCM), and external SPDIF audio input
•
32, 44.1, 48, 88.2, 176.4 and 192kHz audio sampling rates
•
Generates all EIA/CEA-861D formats below 165 MHz, with all possible variations
•
Complete letterbox and scope coverage
•
4:2:2 color sub-sampling at 8, 10, and 12-bits per component
•
Hot-plug format list
•
Includes DVI-D (M) to HDMI (M) cable and HDMI-HDMI cable.
•
HDMI Analyzer available with HDMI Tx on 882E only
•
Supports full single-link HDMI 1.3 (with deep color) and DVI analyzer up to
(150MHz) in same instrument.
3
- Quick Links:
- Video Interfaces
Hide quick links:
Advertisement
Table of Contents
