Quantum Data 881 User Manual page 240

228 Chapter 7 Working with Images
LEVP:R 52
color
To increment or decrement each color component value individually for an image:
1. Select any image you want to modify by pressing the Content key.
Alternatively you can enter the following command:
IMGL SMPTEBar
IMGU
2. Enter the following commands to select and render the image:
LEVP:R 33
LEVP:G 50
LEVP:B 66
// Sets all color component (R,G,B) at 52% full
// Loads the SMPTEbar test image
// Renders the test image that is loaded
// Sets the red component at 33% of maximum color
// Sets the green component at 50% of maximum color
// Sets the blue component at 66% of maximum color