Quantum Data 881 User Manual page 332

320 Chapter 10 Testing Lipsync
3. Activate the HDMI-H interface on the output port:
a. Press the Interface key to access the list of interfaces. A listing of signal interfaces
appears on the 882's display as shown below.
VGA
*
HDMI-D
HDMI-H
b. Choose HDMI-H by pressing the adjacent soft key. The interface is activated and
the port outputs the currently selected image and format.
VGA
HDMI-D
*HDMI-H
c. Alternatively, to activate the interface through the command line interface, enter the
following commands:
XVSI 4
ALLU
4. Read the EDID from the display as follows:
a. Press the Sink key. The following information appears on the 882's display.
Manufacturer:SNY
Product Code:144
Serial#:7011007
Week:20 Year:1998
b. Press the Options key. The following information appears on the 882's display.
-EDID Formats
+HP Bypass
-Emulate
c. Choose the EDID Formats item by pressing the adjacent soft key. A + appears
next to EDID Formats, indicating it is enabled.
CVBS
S-VIDEO
SDI
CVBS
S-VIDEO
SDI
// Selects the HDMI-H interface
// Applies the interface setting to the 882
CDF