Quantum Data 881 User Manual page 688

DVPT
Class
Description
Command syntax
Example
310 Appendix A Command Reference
Digital Video Protocol Type
Format parameter setting - Digital video signal
Controls the output protocol. Setting the DVPT parameter to 2 and issuing a FMTU (or
ALLU) command causes the output signal protocol to switch to HDMI, while setting DVPT
to 1 causes a DVI compatible protocol to be output. All of the formats in the format library
set DVPT to 0. This is a default setting, which lets the output protocol be determined, on a
global basis, by the type of hardware that is present.
DVPT type
type
0 = default (based on hardware present)
1 = DVI 1.0
2 = HDMI 1.0
DVPT 2
FTMU