Quantum Data 881 User Manual page 619

CPTX:CPTR
Class
Description
Command syntax
Other required
commands
Query syntax
Query response
Example 1
Example 2
Example 3
882 Video Test Instrument User Guide (Rev A.35)
Specifies an HDCP compliance test to run
HDCP Compliance
Enables running of HDCP compliance tests through the command line. Tests can be run
either individually or one at a time. This command is used for running HDCP compliance
test either through the HDMI interface or the DisplayPort interface. The command applies
only to the active interface.
CPTX:CPTR test
test
the specific test index you wish to run.
For HDMI 0 through 46 where 46 will run all tests.
For DisplayPort 0 through 48 where 48 will run all tests
The CPTX:CPTU command initiates the running of the test.
CPTX:CPTR?
1 through 46 for HDMI or 1 through 48 for DisplayPort
CPTX:CPTR 1 // Sets up the generator to run the 1A-01 test
CPTX:CPTU // Initiates the test specified with the CPRT command
CPTX:CPTR 46 // Sets up the generator to run all HDCP test
CPTX:CPTU // Initiates the test specified with the CPRT command
CPTX:CPTR? // Queries for the current test specified
16 // Indicates that test number 16 2C-01 is specified
241