Quantum Data 881 User Manual page 893

SDLY
Class
Description
Command syntax
Query syntax
Query response
Other required
commands
Example
882 Video Test Instrument User Guide (Rev A.35)
Sequence step DeLaY
Sequence editor control
Sets how long a sequence step will pause before advancing to the next step in the auto
run mode. A sequence step will use the last value set by the SDLY command. The SDLY?
query returns the current setting of SDLY.
SDLY delay | -frames
delay
Delay time in seconds as a floating point number.
frames
Delay in frames. Type minus (-) character before integer.
min = 0.0 seconds; -1 frame
max = 1.70E38 seconds (infinite)
SDLY?
delay
SMOD setting must be equal to 3 in order for the SDLY setting to have any affect on
sequence operation.
SDLY 5.0 // Set delay to five seconds per step
SDLY -3 // Set delay to three frames per step
515