Selecting Interface Type - Quantum Data 881 User Manual

Selecting interface type

882 Video Test Instrument User Guide (Rev A.35)
Use the following table to connect the 882D or 881D generator to the display under test.
Display type
Information Computer - VESA
Technology (DMT, CVT)
(IT)
Computer - VESA
DDWG
Consumer SDTV - ITU-470-6
Equipment baseband
(CE)
SDTV - ITU-470-6
baseband
SDTV - CEA-861B
HDTV -
CEA-861C
HDTV -
CEA-861C
Profes- SDI
sional AV (SMPTE-259M)
and HD-SDI
(SMPTE-292M-C)
1. Optional cable available from Quantum Data.
After making the physical connection, you are ready to select the interface type for your
display under test.
You can select the interface using either the front panel keys or the command line
interface. The interface is one of the following:
• DVI-D - For testing digital VESA displays (dual link) on the 882D.
• HDMI-D - For testing DVI displays through an HDMI interface.
• HDMI-H - For testing HDMI consumer electronic displays.
Signal type Port (Interface)
Analog component DVI-A with DVI to
RGB VGA adapter
Digital component DVI for single and
RGB dual link or HDMI
OUT (HDMI-D) for
single link only
Analog composite CVBS
CVBS
Analog composite SVIDEO
S-Video
Analog component DVI with DVI to
YPbPr VGA adapter
DVI for single and dual HDMI OUT
link or HDMI OUT (HDMI-D)
(HDMI-D) for single link
only
Digital component HDMI OUT
HDMI RGB and YCbCr (HDMI-H)
Digital component SDI/HD-SDI
YCbCr
Cable
VGA to VGA
DVI to DVI
cable for DVI
connector or
HDMI to DVI for
HDMI-D con-
nector
BNC to RCA
75 Ohm
S-Video
(miniDin)
1
VGA to RCA
DVI to DVI
cable for DVI
connector or
HDMI to DVI for
HDMI-D con-
nector
HDMI to HDMI
BNC Coax
41