Quantum Data 881 User Manual page 469

882 Video Test Instrument User Guide (Rev A.35)
13. Press the Tools key get back to the Reports menu.
The 882 LCD will display the reports menu as shown below.
EDID
Misc
14. Select HDCP to access the HDCP compliance test menu.
The following is displayed on the 882's LCD.
!CompRpt
15. Select !CompRpt to initiate the HDCP compliance test. Initiate each test individually.
The message "HDCP Compliance Test" is shown and then all the tests are shown in
sequence.
Alternatively, to run a specific test through the command line:
CPTX:CPTR 1
CPTX:CPTU
You can query the complete list of tests to choose from:
CPTX:GCTN?
You can query the currently selected test to run with:
CPTX:CPTR?
Refer to "To view the HDCP compliance
view the generated report.
The following table describes tests run with the CPTX:CPTR command for the 882EA.
CPTX:CPTR
I
ndex Test
1 1A_01 (Transmitter Downstream
w/Receiver) w/HDMI Capable
Receiver
2 1A_02 (Transmitter Downstream
w/Receiver) w/HDMI Capable
Receiver
Packets
HDCP
EditPCP
// Selects specific test (e.g. 1A_01) see table below
// Initiates the execution of the test.
// Queries the list of tests supported.
// Queries the selected test to run (see table
below).
report:" on page 605 for procedures on how to
Description
Regular Procedure: With HDMI Capable
Receiver
Regular Procedure: HPD After Writing Aksv
127