Quantum Data 881 User Manual page 131

882 Video Test Instrument User Guide (Rev A.35)
4. Enter the following command to view the generator firmware version (runtime and boot
code versions):
VERF?
20.0882002,01.04.11
5. Enter the following command to view the generator gateware information for each
programmable device:
VERG?
253C,36,1272005:253F,73,8292005:253A,5,4252005
The information provided for each gateware is the Product Code, Revision Code and
Date Code. There are three sets of gatewares listed. The first listing is for an CPLD
which does not have an associated file in the System directory. The second listing is
for the transmitter and the third listing is for the receiver if the analyzer option is present.
To get a report of the genstats image (or any active image):
1. Press the Tools key. The Tools menu appears on the generator's display as shown
below.
System
Sequence
Probe
AFC
2. Choose the Reports item by pressing the adjacent soft key. The Report menu appears
on the generator's display.
EDID
Misc
3. Choose the Misc item by pressing the adjacent soft key. The following menu appears
on the generator's display.
!Formats
!Genstats
4. Choose the !GenStats item by pressing the adjacent soft key. The generator display
will briefly indicate that the report is being generated.
Reports
ImgShift
Analyzer
CEC
Packets
119