Quantum Data 881 User Manual page 620

CPTX:CPTU
Class
Description
Command syntax
Other required
commands
Example 1
Example 2
242 Appendix A Command Reference
Initiates the running of an HDCP compliance test
HDCP Compliance
Actually initiates the running of an HDCP compliance tests through the command line.
This command is used with the CPTX:CPTR command which specifies which test should
be run.
CPTX:CPTU
The CPTX:CPTR command specifies which HDCP test to run.
CPTX:CPTR 1 // Sets up the generator to run the 1A-01 test
CPTX:CPTU // Initiates the test specified with the CPRT command
CPTX:CPTR 46 // Sets up the generator to run all HDCP test
CPTX:CPTU // Initiates the test specified with the CPRT command