Quantum Data 881 User Manual page 316

304 Chapter 9 Testing HDMI Sink Devices
3. Press the Content key and choose the Dolby audio image as shown below. Note that
you can also select the DTS image to access the DTS audio clips.
ComFocus
Crosshtc
DecodAdj DecodeChk
Diamond1
The image appears on the connected HDMI display. The image shows the currently
selected compressed audio format.
Alternatively, to select the Dolby image using the command line interface, enter the
following commands:
IMGP /Cache0/Images
IMGL Dolby
IMGU
IMGL DTS
IMGU
Note: You can output compressed audio formats through the command line without
selecting the Dolby image. To do this you enter the following command:
CAUD? // Queries for the list of stored compressed audio clip
configurations:
1:DTS, 5.1, 48000.00 [dts-48kHz-1509kbps-51ch.wav.pcm]
2:DTS(ES), 6.1, 48000.00 [DTES-ES-48kHz-1509kbps-61ch.wav.pcm]
3:DTS(HDHRA), 7.1, 192000.00 [dtshdhra-48kHz-5376kbps-71ch.wav.pcm]
4:DTS(HDHRA), 5.1, 192000.00 [dtshdhra-48kHz-3840kbps-51ch.wav.pcm]
5:DTS(HDHRA), 7.1, 192000.00 [dtshdhra-96kHz-5760kbps-71ch.wav.pcm]
6:DTS(HDMA), 5.1, 192000.00 [dtshdma-48kHz-VBR-51ch-HDMI_HBR.ba.pcm]
7:DTS(HDMA), 7.1, 192000.00 [dtshdma-48kHz-VBR-71ch-HDMI_HBR.ba.pcm]
ContBars
Cubes
Dolby*
Dolby Audio Library
AC3,2kHz,2Ch,0dB
EAC3,2Ch,-20dB
EAC3,5.1Ch,-20dB
EAC3,7.1Ch,-20dB
Now Playing: TRUEHD,1kHz,7.1Ch,-20dB
Change Image Rendition for other Audio Formats
// Set image path to 882 memory
// Loads the Dolby image
// Activates the Dolby image
// Loads the DTS image
// Activates the DTS image