Quantum Data 881 User Manual page 377

882 Video Test Instrument User Guide (Rev A.35)
2. Activate the HDMI-H interface on the output port:
a. Press the Interface key to access the list of interfaces. A listing of signal interfaces
appears on the 882's display as shown below.
VGA
*
HDMI-D
HDMI-H
b. Choose the HDMI-H item by pressing the adjacent soft key.
The interface is activated and the port outputs the currently selected image and format.
VGA
HDMI-D
*HDMI-H
Alternatively, to select the interface through the command line, enter the following
commands:
XVSI 4 // Selects the HDMI-H interface
ALLU // Applies the interface setting to the 882
3. Press the Source key and choose a valid HDMI format (for example, DMT0660) by
pressing the adjacent soft key.
Alternatively, to select the format through the command line interface, enter the
following command:
FMTL DMT0660
FMTU
CVBS
S-VIDEO
SDI
CVBS
S-VIDEO
SDI
35