Quantum Data 881 User Manual page 122

110 Chapter 3 Administrative Tasks
15. Reconfigure the generator to boot from the Flashmem using the procedures described
in "To boot a generator that is in a stalled
16. Restart the generator.
17. If the problem persists you may have to unseat the video board from the main board:
http://www.quantumdata.com/support/videos/video.asp
18. Repeat the procedure.
To boot a stalled generator from a different host:
1. Power down the generator, hold down the Tools key and then re-apply power to the
generator. The following screen appears on the generator's display:
!BootDev !Passwd
!HostName !Flags
!FileName !Other
!InetAddr !TrgtName
2. Choose the !BootDev item, and then choose the Network Boot item.
3. Press the Tools key and choose the !HostName item by pressing the adjacent soft
key. The following appears on the generator's display:
Boot Line
Setup Boot Host
Hostname
QDEW018
4. Change the host name as follows:
a. Position the blinking cursor on the character you want to change. To do this, press
the soft key adjacent to the arrow by the host name to move the cursor left or right
until it appears on the character you want to change.
b. Select the desired character by pressing the + or - keys to scroll through uppercase
letters, lowercase letters, and numbers. Repeat for each character you want to
change.
5. Press the Options (Enter) key to save the configuration.
6. Return to the Tools menu and choose the !HostAddr item by pressing the adjacent
soft key. The following appears on the generator's display:
Boot Line
Setup TCP_IP
Host IP Address
192.168.254.102
state:" on page 107.
->
->