Quantum Data 881 User Manual page 379

882 Video Test Instrument User Guide (Rev A.35)
6. Choose the EDID you want to load into the Editor. You can load EDIDs from a
connected device, the 882 file system, or from your PC. The following table describes
what selection ports map to which physical interface:
Load EDID From...
882
Device connected to 882
File on PC
a. If you are loading an EDID XML file stored on the 882 generator, select Load EDID
From > 882 from the File menu. Select a valid file.
The EDID is loaded into the Editor.
b. If you are capturing and loading an EDID from a connected display device, select
Load EDID From > Device Connected to > 882 Analyzer Port <x> from the File
menu. (Port 1 is HDMI Tx 1, Port 2 is
Location
A valid EDID XML file stored on the 882 file sys-
tem (in flash memory or on the PC card).
A device that is connected either to the 882's
HDMI Tx ports or the VGA port:
- 882 Analyzer Port 1 - HDMI
- 882 Analyzer Port 2 - HDMI
- 882 Analyzer Port 3 - VGA
A valid EDID XML file stored in the host PC.
TX 2, and Port 3 is VGA.)
HDMI
37